Intellects Energy Ltd.

Allen Bradley RSLogix5 with PLC5 PLC and GE Proficy Machine Edition with Fanuc Series 90-30 PLC Programming

Course Objective

This 6 days beginners to advance course is developed to give hand on practical experience and skills on PLCs Configuration, Programming and Maintenance. Application is opened to anyone desiring to become automation specialist.


  • Students are supposed to be familiar with Desktop/Laptop.
  • No other prerequisites for this course, Because instructor will teach everything from scratch
Course Code: PLC004
Duration: 6 days; 9 hours per day
Course Content

Day1: Allen Bradley RSLogix5 with PLC5

  • System Overview
  • PLC hardware
  • RSLogix 5 Overview
  • Memory Layout
  • Communications
  • Editing Logic
  • Status File
  • Bit Instructions
  • Documentation
  • Timers and Counters
  • Program Flow Control

 Day2: Allen Bradley RSLogix5 with PLC5

  • Searching
  • Data Monitor
  • Forcing
  • Remote I/O
  • Troubleshooting
  • File Instructions
  • Message Instruction
  • Move and Logic Instructions
  • Ladder logic elements 

Day3: Allen Bradley RSLogix5 with PLC5

  • Program applications
  • Online mode
  • Student class activities
  • Develop, implement and program for
  • Level control loop
  • Motor control loop
  • Pressure control
  • Flow control loop
  • Temperature control loop
  • On/Off control loop
  • Close loop control

Day4: GE Proficy Machine Edition with Fanuc Series 90-30 PLC

  • The hardware architecture of the series 90 controllers.
  • I/O Modules and wiring.
  • Introduction to Proficy Machine Edition Software
  • Hardware configuration.
  • Addresses used in the series 90 controllers.
  • Program structure, creating blocks and block declaration.
  • First steps with the programmer.
  • Quick keys used on the programmer for:
    Mode selection, run/stop.
  • Creating a Folder.

Day5: GE Proficy Machine Edition with Fanuc Series 90-30 PLC

  • Loading and save Folders to the PLC.
  • Online monitoring and searching.
  • Using and creating program documentation.
  • Editing and modifying programs.
  • Instruction set:
    Relay, maths, move, compare and logic functions.
  • Copying and backing up folders.
  • Analogue modules and analogue scaling.

Day6: GE Proficy Machine Edition with Fanuc Series 90-30 PLC

  • Introduction to Genius communications.
  • Concept of System bits.
  • Data monitoring using the reference tables.
  • Forcing Facilities.
  • Other communication options.
  • Faulting tables.
  • Diagnosis and resetting faults.
  • Documentation using the variable declaration and rung comments.
  • Application exercises on your plant exercises.
  • Case study simulation of PLC
  • Close loop programming
  • Programming of temperature, flow, level and pressure control loop
  • Upload from PLC
  • Download to PLC
  • Student activities
  • Questions and answers

Free PLCs programming software installation

  • Guide trainees to download and install available free PLC software on their personal laptops for further practice
  • Issue certificates