Intellects Energy Ltd.

Best Automation System Test Center and Instrument Calibration Lab in Nigeria

Are you looking for where and experts to test your control systems like DCS, PLC, HMI and SCADA, we are here to support you and your project. We offered an equipped test center and instrument calibration lab at our Warri office to satisfy your project requirements. Our services include

  • Control system testing and maintenance
  • Control system programming
  • Site Acceptance Testing SAT
  • Factory Acceptance Testing FAT and witnessing
  • Instrument calibration services

Instrumentation, Controls and Automation Training Center In Nigeria

Intellects Energy Oil and Gas Training and Skill Acquisition Center

Intellects is the best practical training and skill acquisition center in Nigeria. They offer training that covers various engineering and technology industry which is not limited to .

Oil and Gas Industry Practical and Skill Acquisition Training

Energy Industry Practical and Skill Acquisition Training

Food Industry Practical and Skill Acquisition Training

Click link to courses http://intellectsenergy.com/courses/

PLC, SCADA, HMI and Instrumentation Training Courses In Nigeria

Here is a list of some of the courses being offered at Intellects Energy. Click here for course details 

 

PLC001: PLC Programming: Allen Bradley ControlLogix 5000 PLC and Direct Logic 205 PLC

PLC002: PLC Programming: Siemens Simatic S7 300 PLC and Omron CQ1MH PLC
PLC003: PLC Programming: Allen Bradley SLC 500 PLC and Omron CQ1MH PLC
PLC004: PLC Programming: Allen Bradley PLC5 PLC and GE Fanuc Series 90-30 PLC
IPLC005: Practical Instrumentation and PLC programming

IMC001: Practical Instrumentation Measurement and Calibration
EICQ002: Practical Electrical and Instrument Installation, Hookup, QA/QC and Pre-Commissioning
EIC003: Practical Low Voltage Electrical and Instrumentation Commissioning
ICM004: Practical Instrumentation and Control Systems Maintenance and Troubleshooting

ECM007: Practical Industrial Electrical Controls, Maintenance and Troubleshooting
APM008: Online Gas Analyzers Principles and Maintenance
SIS006: Safety Instrumented System
FM009: Oil and Gas Fiscal Metering
MOP10: Machines Operations Principles and Maintenance: Compressors, Pumps, Generators, Gas Turbines and Motors

EAT011: Electronics circuits and Appliances Troubleshooting and Repairs

SIM012: Solar Power Generation, Installation and Maintenance

Best Automation, Controls and Instrumentation Training Institute In Nigeria

Intellects offers training in best selected over 10 different PLCs which are of high demand in the automation profession in Nigeria. The training is aimed at developing manpower for oil and gas, energy, chemical and food industries is a practical experience training, using physical hardware PLC, real field instruments and the training is delivered by certified automation and instrumentation experts. Some of the PLC include the following list;

1. Allen Bradley ControlLogix5000 PLC

This is a Rockwell Automation PLC and the software use to program this PLC is the RSLogix5000. Programming skills of this PLC is of high demand in the oil and gas, energy and food industry

2. Siemens S7 300.

Siemens S7 300 can be programmed with either Simatic Manager software or TIA Portal software. TIA software is mostly used for the training and the skill is of high demand in Nigeria.

3. Allen Bradley SLC500 PLC

Rockwell AB SLC500 PLC is programmed with RSLogix500 software. It is one of the high demand skills required by automation specialists.

4. Allen Bradley PLC5 PLC

PLC5 is programmed with RSLogix5 software. It is one of their old PLC series but many employers need employees wit the programming skills.

5. GE Fanuc Series 90-30 PLC

GE Fanuc is programmed with Proficy Machine Edition software at Intellects Energy PLC Training Center

6. Omron CQ1MH PLC

CX-One Programmer software is used to program this Omron PLC and it is one of the highly recommended PLC to learn in Nigeria

7. Automation DirectLogic PLC Programming with DirectSoft6 Software

8. Red Lion PLC programming with Crimson 3.2 software

9. Delta PLC Programming with ISPSoft Software

10. Schneider TWIDO PLC Programming with Twido Suite Software

11. Keyence kV-40DT PLC Programming with KV Stuidio Software

12. Mitsubishi FX2N PLC Programming with GXworks2 Software

8. Intouch Wonderware SCADA

Intouch Wonderware SCADA is a software use to program graphic display of equipment and instrumentation for plant operations

Click link to courses http://intellectsenergy.com/courses/

Instrumentation and Automation PLC, SCADA and HMI Programming Training Center In Nigeria

Intellects Energy offer training on PLCs, SCADA, HMI Programming and Instrumentation to employees to various organizations in Warri, Lagos, Port Harcourt, Abuja, Owerri and other part of Nigeria. For individuals wishing to attend any of our trainings, the primary training center is at Warri, Delta State, Nigeria. http://intellectsenergy.com/courses/

PLC, SCADA, HMI programming and Instrumentation Training in Lagos

Intellects Energy offer training on PLCs, SCADA, HMI Programming and Instrumentation to employees in various organizations in Lagos and other part of Nigeria. For individuals wishing to attend any of our trainings, the primary training center is at Warri, Delta State, Nigeria

Click link to courses http://intellectsenergy.com/courses/

Instrumentation and PLC Programming Training In Port Harcourt

Intellects Energy offer training on PLCs, SCADA, HMI Programming and Instrumentation to employees in various organizations in Port Harcourt and other part of Nigeria. For individuals wishing to attend any of our trainings, the primary training center is at Warri, Delta State, Nigeria.

Click link to courses http://intellectsenergy.com/courses/

PLC TRAINING IN NIGERIA

Intellects Energy Ltd offers training in some of the best selected PLCs which are of high demand in the automation profession in Nigeria. Primary training location is Warri, however, Intellects can offer training at any organization facility location, Port Harcourt, Lagos, Abuja and any Africa country. The PLC programming training is practical using physical hardware PLC, real field instruments and the training is delivered by certified automation and instrumentation experts. Some of the PLC include the following list;

Click link to courses http://intellectsenergy.com/courses/

 

1. Allen Bradley ControlLogix5000 PLC

This is a Rockwell Automation PLC and the software use to program this PLC is the RSLogix5000. Programming skills of this PLC is of high demand in the oil and gas, energy and food industry

2. Siemens S7 300.

Siemens S7 300 can be programmed with either Simatic Manager software or TIA Portal software. TIA software is mostly used for the training and the skill is of high demand in Nigeria

3. Allen Bradley SLC500 PLC

Rockwell AB SLC500 PLC is programmed with RSLogix500 software. It is one of the high demand skills required by automation specialists.

4. Allen Bradley PLC5 PLC

PLC5 is programmed with RSLogix5 software. It is one of their old PLC series but many employers need employees wit the programming skills.

5. GE Fanuc Series 90-30 PLC

GE Fanuc is programmed with Proficy Machine Edition software at Intellects Energy PLC Training Center

6. Omron CQ1MH PLC

CX-One Programmer software is used to program this Omron PLC and it is one of the highly recommended PLC to learn in Nigeria

7. Automation DirectLogic 205 PLC

The DirectLogic205 Koyo PLC is programmed with DirectSoft5 or DirectSoft6 software

8. Intouch Wonderware SCADA

Intouch wonderware SCADA is a software use to program graphic display of equipment and instrumentation for plant operations

Best PLC Training Institute in Nigeria

Intellects Energy Ltd offers training in some of the best selected PLCs which are of high demand in the automation profession in Nigeria. Th e PLC programming training is practical using physical hardware PLC, real field instruments and the training is delivered by certified automation and instrumentation experts. Some of the PLC include the following list;

Click link to courses http://intellectsenergy.com/courses/

1. Allen Bradley ControlLogix5000 PLC

This is a Rockwell Automation PLC and the software use to program this PLC is the RSLogix5000. Programming skills of this PLC is of high demand in the oil and gas, energy and food industry

2. Siemens S7 300.

Siemens S7 300 can be programmed with either Simatic Manager software or TIA Portal software. TIA software is mostly used for the training and the skill is of high demand in Nigeria

3. Allen Bradley SLC500 PLC

Rockwell AB SLC500 PLC is programmed with RSLogix500 software. It is one of the high demand skills required by automation specialists.

4. Allen Bradley PLC5 PLC

PLC5 is programmed with RSLogix5 software. It is one of their old PLC series but many employers need employees wit the programming skills.

5. GE Fanuc Series 90-30 PLC

GE Fanuc is programmed with Proficy Machine Edition software at Intellects Energy PLC Training Center

6. Omron CQ1MH PLC

CX-One Programmer software is used to program this Omron PLC and it is one of the highly recommended PLC to learn in Nigeria

7. Automation DirectLogic 205 PLC

The DirectLogic205 Koyo PLC is programmed with DirectSoft5 or DirectSoft6 software

8. Intouch Wonderware SCADA

Intouch wonderware SCADA is a software use to program graphic display of equipment and instrumentation for plant operations